| Item | Z8000 |
| Standard Function | Control mode | Senseless flux vector control(SFVC) ; Closed-loop vector control; V/F control |
| Maximum frequency | Vector control: 0-320Hz ; V/F control: 0-3200Hz |
| Carrier frequency | 1-16kHz ; The carrier frequency is automatically adjusted based on the load features |
| Input frequency solution | Digital setting: 0.01Hz ; Analog setting: 0.025% of maximum frequency |
| Startup torque | G type: 0.5Hz/150%(SFVC) ; 0 Hz/180% (CLVC) P type: 0.5Hz/100% |
| Speed range | 1:100 (SFVC); 1:1000 (CLVC) |
| Speed stability accuracy | ±0.2% (SFVC); ±0.2% (CLVC) |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. P type: 60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto boost ; Customized boost 0.1%-30.0% |
| V/F curve | Line V/F curve; Multi-point V/F curve; N-power V/F curve(1.2-power, 1.4-power, 1.6-power, 1.8-power, square) |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp ; S-curve ramp ; Four groups of acceleration/deceleration time with the range of 0.0-6500.0s |
| DC braking | DC braking frequency : 0.0Hz to maximum frequency Braking time: 0.0~100.0s Braking action current value: 0.0%~100.0% |
| JOG control | JOG frequency range: 0.00~50.00Hz JOG acceleration/deceleration time: 0.0~6500.0s |
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states. |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes. |
| Auto voltage/ Over current stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive |
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Toque control can be implemented in the CLVC mode. |
